| Here are some photos of the sewer carrier project that I just completed. The Pipe is standard 4" PVC pipe with clean out plugs and adapters. I drilled end cap to attach chain with cotterpins so I don't loose cap. I also put duct tape over straps underneath to try to protect them from rusting to bad as they are not stainless. There are 2 hoses in the carrier, one is a 20 footer and the other is a 10 footer. I used push on connectors to attach 90 degree elbow on one end and black water tank fitting on the other end. Hopefully it won't come apart when I put it together. |
|
|
|
|
Nice Work Tom!
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Thanks for sharing these treasures Tom.
 |
 |
Short hose section for attaching the regulator |
Inside the box |
 |
 |
Outlet Side |
Inlet Side |
 |
 |
 |
 |
 |
 |
 |
Thanks Tom for the photos...I think I am missing two of them. |